I Don't Know What I Would Do With Out Coffee - 25 Years T-Shirt Size Decal (Copy)

• I Don't Know What I Would o With Out COFFEE I'm Guessing 25 to LIFE 
• T-Shirt Size 
• Decal  
• This is for the DTF Heat Transfer only (not the finished garment)!  You will receive a ready-to-press transfer.
• The DTF (Direct To Film) Transfers can be applied with either a heat press or a home iron on a variety of fabrics, including cotton.    A heat press is faster and easier, but a home iron will work too! 
  
  They are full color and are heat applied for either light or dark garments.  No weeding is required, and can be applied to cotton, cotton/poly blends, and even 100% polyester!  Simply press n go!

Heat Press Instructions
Pre-Heat your Heat Press to reach 300-320 degrees.
1. Press your item on the side you will have your design to give it a nice smooth surface.
2. Place your DTF Transfer in the exact location you want.
3. Cover your DTF Transfer with Teflon or parchment paper of the same size or larger. This will help
avoid your transfer from lifting.
4. Use your preheated Heat Press at 300-325 degrees to press down with heavy pressure for 15-20
seconds. We recommend letting them cool for about 10 seconds before peeling, and if there’s
small lettering on your design, use a towel to protect your fingers and press gently on that area to
give it some extra love while cooling. Then peel.
5. Once peeled, cover the design with Teflon or parchment paper and give it one final press for 5
seconds.
Home Iron Instructions
1. Set your iron to the highest cotton setting without steam.
2. Preheat your garment for a few seconds to remove any moisture and wrinkles.
3. Place the transfer onto the garment in the exact location you want the design.
4. Apply firm and even pressure while moving the iron in a circular motion for about 20-30 seconds. A
non-slip silicone pressing mat or wool pressing mat underneath is extremely helpful in this step.
RARELY DOES A TRANSFER TAKE MORE THAN 20-30 seconds---if you’re doing it longer, you’ll risk
scorching the item you’re embellishing.
5. Let it cool for 5-10 seconds and take a peek to see if the design has transferred. If not, repeat
steps 4 and 5 until it’s transferred onto your item.
6. If your design has small lettering or bits, use a towel to protect your fingers and press gently on
that area as it cools. This will help those smaller details to transfer correctly.
7. These transfers are a warm peel - we do recommend letting it sit for about 10 seconds before
starting the peel.
8. Once you’ve lifted the transfer film, do a final press of 7-10 seconds using teflon or parchment
paper over the design so you don’t damage it.
Wash & Care Of Your Printed Item
• Turn your apparel inside out. Machine wash cold. For best results use a mild detergent with no
bleach, no whitening/brightening detergent. (No bleach, OxiClean, or Fabric Softeners, etc.)
Tumble dry low or hang to dry. Never iron over any design without the use of Teflon or parchment.